FR  |  EN
Product type Filter selection

Welding

Showing 1 to 25 of 108 (5 Pages)
25 Series Cylinder

THE HARRIS PRODUCTS GROUP

25 Series Cylinder

  • Designed for cylinders
  • Available in 320 and 580 connections
  • Available for MIG or TIG applications

Model: TTU628

25 Series Cylinder

THE HARRIS PRODUCTS GROUP

25 Series Cylinder

  • Designed for cylinders
  • Available in 320 and 580 connections
  • Available for MIG or TIG applications

Model: TTU629

25 Series Cylinder

THE HARRIS PRODUCTS GROUP

25 Series Cylinder

  • Designed for cylinders
  • Available in 320 and 580 connections
  • Available for MIG or TIG applications

Model: TTU630

301 Series Flowmeter Or Feeder Mount

THE HARRIS PRODUCTS GROUP

301 Series Flowmeter Or Feeder Mount

  • Designed to connect to an existing flowmeter, flometer regulator or to a wire feeder
  • Available with or without a gauge

Model: TTU632

301 Series Flowmeter Or Feeder Mount

THE HARRIS PRODUCTS GROUP

301 Series Flowmeter Or Feeder Mount

  • Designed to connect to an existing flowmeter, flometer regulator or to a wire feeder
  • Available with or without a gauge

Model: TTU633

301 Series Flowmeter Or Feeder Mount

THE HARRIS PRODUCTS GROUP

301 Series Flowmeter Or Feeder Mount

  • Designed to connect to an existing flowmeter, flometer regulator or to a wire feeder
  • Available with or without a gauge

Model: TTU631

50/50 Common Solder Bar, Lead-Based, 50% Tin 50% Lead

THE HARRIS PRODUCTS GROUP

50/50 Common Solder Bar, Lead-Based, 50% Tin 50% Lead

    Model: NT235

    60/40 Common Solder, Lead-Based, 60% Tin 40% Lead, Rosin Core, 1/16" Dia.

    THE HARRIS PRODUCTS GROUP

    60/40 Common Solder, Lead-Based, 60% Tin 40% Lead, Rosin Core, 1/16" Dia.

      Model: NT239

      60/40 Common Solder, Lead-Based, 60% Tin 40% Lead, Solid Core, 1/8" Dia.

      THE HARRIS PRODUCTS GROUP

      60/40 Common Solder, Lead-Based, 60% Tin 40% Lead, Solid Core, 1/8" Dia.

      • With some exceptions, the tin/lead solders can be used to solder copper and most copper alloys, lead, nickel alloys and steel
      • Heat sources include soldering guns, irons and torch applications
      • Acid Core: For stainless steel application ; Rosin Core: For electrical application
      • Tin/Antimony 95/5 is useful for applications where moderately elevated temperatures is a factor
      • It has a high electrical conductivity and is recommended where lead contamination must be avoided; not recommended for use on brass or HVAC connections; ; Caution: Lead-bearing solders are not to be used in potable water systems

      Model: 858-1110

      95/5 Solder, Lead-Free, 95% Tin 5% Antimony, 1/8" Dia.

      THE HARRIS PRODUCTS GROUP

      95/5 Solder, Lead-Free, 95% Tin 5% Antimony, 1/8" Dia.

      • 95/5 Solder - 1/8 x #1 Spool
      • 95/5 SOLDER (95% TIN, 5% ANTIMONY)
      • With some exceptions, the tin/lead solders can be used to solder copper and most copper alloys, lead, nickel alloys and steel
      • Heat sources include soldering guns, irons and torch applications
      • Acid Core: For stainless steel application ; Rosin Core: For electrical application
      • Tin/Antimony 95/5 is useful for applications where moderately elevated temperatures is a factor
      • It has a high electrical conductivity and is recommended where lead contamination must be avoided; not recommended for use on brass or HVAC connections; ; Caution: Lead-bearing solders are not to be used in potable water systems

      Model: 858-1140

      Al-Braze EC Aluminum Brazing Flux

      THE HARRIS PRODUCTS GROUP

      Al-Braze EC Aluminum Brazing Flux

      • Powdered flux is recommended to use with 4047 (formerly 718) brazing alloy and other aluminum brazing alloys
      • May be mixed with water or alcohol to form a paste
      • Meets specs AMS 3412, AWS A5.31 Type FB1A

      Model: 841-1137

      Aluminum Alloys

      THE HARRIS PRODUCTS GROUP

      Aluminum Alloys

      • ALCoR Flus-cored Aluminum Alloy
      • Alsolder 500 forms excellent corrosion-resistant joints on the tough-to-solder aluminum alloys
      • Joins all solderable aluminum alloys to each other and dissimilar metals, both ferrous and non-ferrous
      • Also beneficial as a high-temperature solder on most other metals
      • Al-Braze is a superior brazing alloy for joining of aluminum to aluminum
      • Not recommended for brazing aluminum directly to non-aluminum alloys, as the joints may be brittle
      • Al-Braze is free flowing with unequaled capillary attraction, ductility and penetration
      • Excellent corrosion resistance
      • ALCoR aluminum alloy with non-corrosive flux inside the wire; no external flux required
      • Very good fluidity with good capillary attraction
      • Post-braze cleaning is unnecessary
      • Better than tin-zinc and aluminum silicon alloys for aluminum coil repair
      • Typical application: A low temp, free flowing, flux-cored solder for aluminum joining or repairing

      Model: TTT590

      Blockage® Brazing Alloys

      THE HARRIS PRODUCTS GROUP

      Blockage® Brazing Alloys

      • Flux-Coated Rod
      • Silicon brazing alloys offer significant advantages over phos/copper and silver/phos/copper (BCuP) brazing alloys
      • Outstanding ability to form a large shoulder or cap at the braze connection
      • Distinct, favourable colour changes in the finished braze alloy
      • Improved ductility over non-silver-bearing BCuP-2 braze alloys
      • Easily brazes brass and brass alloys without the addition of silver
      • Significantly reduces brazing temperatures compared to BCuP braze alloys
      • Choice of bare or flux-coated rod, 2 mm x 20 stick tube Typical Application -
      • For copper or brass. Reduced brazing temperature, visible braze alloys, easy joint inspection. Excellent for HVAC applications.

      Model: NP990

      Blockage® Brazing Alloys

      THE HARRIS PRODUCTS GROUP

      Blockage® Brazing Alloys

      • Bare Rod
      • Silicon brazing alloys offer significant advantages over phos/copper and silver/phos/copper (BCuP) brazing alloys
      • Outstanding ability to form a large shoulder or cap at the braze connection
      • Distinct, favourable colour changes in the finished braze alloy
      • Improved ductility over non-silver-bearing BCuP-2 braze alloys
      • Easily brazes brass and brass alloys without the addition of silver
      • Significantly reduces brazing temperatures compared to BCuP braze alloys
      • Choice of bare or flux-coated rod, 2 mm x 20 stick tube Typical Application -
      • For copper or brass. Reduced brazing temperature, visible braze alloys, easy joint inspection. Excellent for HVAC applications.

      Model: NP989

      Bridgit® Paste Flux

      THE HARRIS PRODUCTS GROUP

      Bridgit® Paste Flux

      • Will not burn at soldering temperatures, reducing black carbon formations that can result in voids and leaks
      • Works extremely well with Bridgit® lead-free solder in potable water systems
      • Flux should work equally well with other solders
      • Stays active to 800°F
      • Designed primarily for copper tube applications

      Model: TTT593

      Bridgit® Solder, Lead-Free, 1/8" Dia.

      THE HARRIS PRODUCTS GROUP

      Bridgit® Solder, Lead-Free, 1/8" Dia.

      • Bridgit® 1/8 x 1 # Spool Lead Free Solder
      • Bridgit(R) is a non-toxic solder alloy that exceeds the physical advantages of lead-tin solders
      • Contains nickel, making joints tremendously strong
      • Wide plastic range makes this an excellent alloy for large diameter fittings and ill-fitted or non-concentric pipes
      • Fills gaps and caps off easily and effectively
      • Typical Application: Wide plastic range makes this an excellent alloy for large diameter fittingd and ill-fitted or non-concentric pipes

      Model: 848-1035

      Classic Cutting Attachments

      THE HARRIS PRODUCTS GROUP

      Classic Cutting Attachments

      • Solid forged head resists abuse and distortion
      • Triangular tube design is compact and lightweight with exceptional strength and rigidity
      • Brazed connections prevents leaks
      • Protected torch union nut protects seals and O-rings from abuse
      • Solid forged lever for exceptional strength
      • Ease-on cutting oxygen control for smoother starts
      • 90° torch head angle

      Model: TTT900

      Classic Cutting Attachments

      THE HARRIS PRODUCTS GROUP

      Classic Cutting Attachments

      • Solid forged head resists abuse and distortion
      • Triangular tube design is compact and lightweight with exceptional strength and rigidity
      • Brazed connections prevents leaks
      • Protected torch union nut protects seals and O-rings from abuse
      • Solid forged lever for exceptional strength
      • Ease-on cutting oxygen control for smoother starts
      • 90° torch head angle

      Model: TTT901

      Classic Torch Handle No. 43-2

      THE HARRIS PRODUCTS GROUP

      Classic Torch Handle No. 43-2

      • High capacity combination handle
      • Stainless steel head
      • Equipped with FlashGuard® check valves
      • Capacity: cuts 6", welds to 1"
      • 9 1/2" length

      Model: TTT898

      Classic Torch Handle No. 85

      THE HARRIS PRODUCTS GROUP

      Classic Torch Handle No. 85

      • Silver brazed twin tube construction for safety and durability
      • Equipped with FlashGuard® check valves
      • Capacity: cuts 5", welds to 1/2"
      • 8 1/2" length

      Model: TTT899

      Clear Cover Lenses

      THE HARRIS PRODUCTS GROUP

      Clear Cover Lenses

      • CAST RESIN
      • Cast resin lenses are also for eye protection and are more resistant to heat, scratching and pitting

      Model: SAN056

      Clear Cover Lenses

      THE HARRIS PRODUCTS GROUP

      Clear Cover Lenses

      • CLEAR GLASS
      • Clear glass lenses are not impact resistant and are only for use against spatter

      Model: SAN058

      Clear Cover Lenses

      THE HARRIS PRODUCTS GROUP

      Clear Cover Lenses

      • CLEAR GLASS
      • Clear glass lenses are not impact resistant and are only for use against spatter

      Model: SAN059

      Clear Cover Lenses

      THE HARRIS PRODUCTS GROUP

      Clear Cover Lenses

      • CAST RESIN
      • Cast resin lenses are also for eye protection and are more resistant to heat, scratching and pitting

      Model: SAN055

      E308L-16 and E316L-16 Stainless Steel Covered Electrodes

      THE HARRIS PRODUCTS GROUP

      E308L-16 and E316L-16 Stainless Steel Covered Electrodes

      • Exactingly manufactured to conform to the requirements of AWS5.4
      • Sold per 5 or 10-lb. package

      Model: 832-1195

      Showing 1 to 25 of 108 (5 Pages)

      Your partner in optimizing your space

      We offer turnkey service!

      Current promotions PROMOTIONS
      Close

      Heavy-Duty Stationary Cabinet - 11 drawers (with Compartments)

      Heavy-Duty Stationary Cabinet - 11 drawers (with Compartments)

      4,434.05$

      2,571.75$

      View product

      View all promotions

      Request information or an estimate online INFORMATION
      Close











      Chat with us CHAT