FR  |  EN
Product type Filter selection

Welding

Showing 1 to 25 of 3208 (129 Pages)
#1 Contour Marker

CURV-O-MARK

#1 Contour Marker

  • Curv-O-Mark® Contour® marker is a compact, time-saving tool used to lay out pipe and structural steel joints
  • Laterals at any angle, tees, wyes, crosses, elbows
  • Any type or size of joint can be quickly and precisely laid out
  • No more complicated mathematical formulas or needless material waste
  • Can be used to lay out pipe from 1-1/2" to 18" diameter, or structural steel members up to 18"
  • Consists of an X-shaped frame, calibrated protractor, and a triple-jointed marking arm and holder
  • Holder accepts a soapstone crayon (included), felt pen or pencil
  • Frame easily folds into a compact tool that fits into a pocket or carrying case
  • Can be used right side up or upside down, depending on the direction of the line to be scribed
  • Protractor calibrated on both sides-one in degrees, the other in rise-inches-per foot-to service any type of measurement need
  • Optional combination adaptor accessory allows the marker to lay out joints on larger size pipe, as well as scribe compound angles with just one setting

Model: 430-2000

#10 Pipe Flange Aligner

CURV-O-MARK

#10 Pipe Flange Aligner

    Model: 430-2100

    #2 Contour Marker Combo Adaptor

    CURV-O-MARK

    #2 Contour Marker Combo Adaptor

      Model: 430-2010

      #28 Magnetic Burning Guide

      CURV-O-MARK

      #28 Magnetic Burning Guide

      • Designed for use with a burning torch or as a straight edge
      • Cast of strong, durable material to withstand heat and spatter
      • Base has three 30-lb pull cast-in magnets for use in any position
      • 24" blade on a raised plane is standard

      Model: 430-2190

      #29 34" Extension For #28 Magnetic Burning Guide

      CURV-O-MARK

      #29 34" Extension For #28 Magnetic Burning Guide

      • Each is in two sections

      Model: 430-2200

      #30 48" Extension For #28 Magnetic Burning Guide

      CURV-O-MARK

      #30 48" Extension For #28 Magnetic Burning Guide

      • Each is in two sections

      Model: 430-2210

      #31 72" Extension For #28 Magnetic Burning Guide

      CURV-O-MARK

      #31 72" Extension For #28 Magnetic Burning Guide

      • Each is in two sections

      Model: 430-2220

      #32 Flange Aligner Base

      CURV-O-MARK

      #32 Flange Aligner Base

      • Removes the difficulty of flange aligning and squaring
      • Holds square in the needed position without tying up one's hands
      • Notched at either end for ease in aligning on the centreline of the pipe and has two 25 lb-pull, cast-in magnets for holding either a flat horizontal or vertical position
      • Accepts either leg of a standard or combination square and will work on pipe diameters from 1" up, requiring only extension of the legs of the square being used to accommodate larger diameters
      • Made from lightweight, durable aluminum

      Model: 430-2230

      #4 Alumina Nozzle

      CK WORLDWIDE INC

      #4 Alumina Nozzle

        Model: 818-3065

        #4 Jumbo Contour Marker

        CURV-O-MARK

        #4 Jumbo Contour Marker

        • Larger version of the Contour Marker®
        • Developed for use in the layout of large diameter pipe, from 8" to 48"
        • Structural adaptor, can be used in the layout of extremely large structural steel members up to 48" wide
        • Comes complete with a durable web strap that helps hold the unit in place during layout
        • Built-in adjustable dial bubble protractor ensures accurate centre-line location
        • Soapstone crayon included

        Model: 430-2030

        #5 Jumbo Marker Combo Adaptor

        CURV-O-MARK

        #5 Jumbo Marker Combo Adaptor

          Model: 430-2040

          #6 Centering Head - Standard

          CURV-O-MARK

          #6 Centering Head - Standard

          • Used on pipe 1/2" to 4" diameter or larger
          • Fitted with an adjustable dial bubble protractor (DSL), manually operated centering pin

          Model: 430-2050

          #7 Centering Head - Jumbo

          CURV-O-MARK

          #7 Centering Head - Jumbo

          • For pipe 1" diameter and up
          • Includes DSL
          • Spring-loaded hardened centering pin eliminates the need for a hammer
          • Align and press the trigger

          Model: 430-2070

          #8 Pro-Mag Level

          CURV-O-MARK

          #8 Pro-Mag Level

          • Made from cast aluminum
          • Lightweight, easy-to-use tool for determining angles
          • 360° adjustable DSL with two 90° quadrants graduated in 2-1/2° increments
          • Cast-in tables used to convert degree-of-angle to rise-in-inches-per-foot or millimetres-per-meter
          • Groove on the bottom edge permits use on a small pipe
          • Ideal for pipe fitter, welder, jig builder or anyone who has to determine angles or do setup work
          • Includes two cast-in 25-lb pull magnets that hold securely to any steel surface
          • 9" L x 2" H x 3/4" Thick

          Model: 430-2080

          #9 Filter Welding Protractor

          CURV-O-MARK

          #9 Filter Welding Protractor

            Model: 430-2090

            0.02" Collet

            CK WORLDWIDE INC

            0.02" Collet

              Model: TTT381

              0.02" Collet

              CK WORLDWIDE INC

              0.02" Collet

                Model: 818-2925

                0.024" M6 Contact Tip

                WELD-MATE

                0.024" M6 Contact Tip

                  Model: TTT148

                  0.030" M6 Contact Tip

                  WELD-MATE

                  0.030" M6 Contact Tip

                    Model: TTT149

                    0.035" Aluminum Welding Kit

                    CENTURY

                    0.035" Aluminum Welding Kit

                    • Includes: Drive roll, non-metallic cable liner and contact tips (qty. 6) for feeding 0.035" (0.9 mm) aluminum MIG wire
                    • Also includes 1 lb. spool of SuperGlaze ™ 4043 aluminum MIG wire

                    Model: TTU575

                    0.04" Collet

                    CK WORLDWIDE INC

                    0.04" Collet

                      Model: 818-3045

                      0.04" Collet

                      CK WORLDWIDE INC

                      0.04" Collet

                        Model: 818-3040

                        0.040" M6 Contact Tip

                        WELD-MATE

                        0.040" M6 Contact Tip

                          Model: TTT150

                          0.052" M6 Contact Tip

                          WELD-MATE

                          0.052" M6 Contact Tip

                            Model: TTT151

                            1.4-oz. Disposable Oxygen Cylinder, Oxygen

                            BERNZOMATIC

                            1.4-oz. Disposable Oxygen Cylinder, Oxygen

                            • Use with propylene gas for hottest brazing performance and light cutting/welding.

                            Model: TTU688

                            Showing 1 to 25 of 3208 (129 Pages)

                            Your partner in optimizing your space

                            We offer turnkey service!

                            Current promotions PROMOTIONS
                            Close

                            Heavy-Duty Stationary Cabinet - 11 drawers (with Compartments)

                            Heavy-Duty Stationary Cabinet - 11 drawers (with Compartments)

                            4,434.05$

                            2,571.75$

                            View product

                            View all promotions

                            Request information or an estimate online INFORMATION
                            Close











                            Chat with us CHAT